THE NEW SUPERIOR DCC CONTROL SYSTEM

SLOW MOTION POINT MOTORS – DCC READY

ModeltrainsUK at Cravenmodels

Model Railway Accessories – UK and Continental Railways

Tel: 01588 660 580 cravenmodels@btconnect.com

TRAINTRONICS DCC AVAILABLE TO ORDER

Tel 01588 660 580

WARNING DELICATE ELECTRICS / ELECTRONICS

Beware of STATIC ELECTRICITY on HANDS & TOOLS

DCC and ELECTRONIC COMPONENT HANDLING.

This Signal Kit contains delicate electrics / electronic components. Please read the installation instructions very carefully – Several times.

If in any doubt please contact your Local Electronics Expert. Ensure that you use the correct power supply.

Incorrect installation will cause instant failure and possible short circuiting.

STATIC ELECTRICITY

Static electricity refers to the build up of electric charge on the surface of objects. The static charges remain on an object until they either bleed off to ground or are quickly neutralized by a discharge.

Although charge exchange can happen whenever any two surfaces come into contact and separate, a static charge will only remain when at least one of the surfaces has a high resistance to electrical flow (an electrical insulator).

The effects of static electricity are familiar to most people because we can see, feel and even hear the spark as the excess charge is neutralized when brought close to a large electrical conductor (for example a path to ground),

or a region with an excess charge of the opposite polarity (positive or negative). The familiar phenomenon of a static 'shock' is caused by the neutralization of charge.

Static electricity can reside in people, clothing or tools etc.

The static electricity must be discharged to EARTH before handling any delicate electronic components or computer components.

Use of Magnetic tools should be avoided at all times.

Warranty and Returns www.cravenmodels.com/TERMS.htm

CLICK >>> <<< CLICK

		DCC UNITS
CM-TT300	Traintronics	300 DCC& DCC FITTED – SLOW MOTION POINT MOTOR – THIS IS NOT A TOY To view small print please increase your screen size to 200%
CM-TT301	Traintronics	DCC DC INTERFACE DECODER FOR TRAINTRONICS SIGNALS – THIS IS NOT A TOY
CM-TT301	Traintronics	DCC DC INTERFACE DECODER – THIS IS NOT A TOY FOR TRAINTRONICS SIGNALS NEW !! Now you can run your colour light signals from your DCC Controller!. This circuit board replaces the one supplied with Traintronics signals. Once you have switched over the boards, simply connect your DCC feed to the correct terminals and off you go! Runs 2, 3 & 4 aspect signals - including those with feathers. IT IS ASSUMED THAT YOU HAVE A GOOD KNOWLEDGE OF DCC SYSTEMS WARNING DELICATE ELECTRICS / ELECTRONICS Beware of STATIC ELECTRICITY on HANDS & TOOLS This Signal Kit contains delicate electrics / electronic components. Please read the installation instructions very carefully – Several times. If in any doubt please contact your Local Electronics Expert. Ensure that you use the correct power supply. Incorrect installation will cause instant failure and possible short circuiting. Cravenmodels – Modeltrainsuk DCC and ELECTRONIC COMPONENT HANDLING. This Signal Kit contains delicate electrics / electronic components. Please read the installation instructions very carefully – Several times. If in any doubt please contact your Local Electronics Expert. Ensure that you use the correct power supply. Incorrect installation will cause instant failure and possible short circuiting. STATIC ELECTRICITY Static electricity refers to the build up of electric charge on the surface of objects. The static charges remain on an object until they either bleed off to ground or are quickly neutralized by a discharge. Although charge exchange can happen whenever any two surfaces come into contact and separate, a static charge will only remain when at least one of the surfaces has a high resistance to electrical flow (an electrical insulator). The effects of static electricity are familiar to most people because we can see, feel and even hear the spark as the excess charge is neutralized when brought close to a large electrical conductor (for example a path to ground), or a region with an excess charge of the opposite polarity (positive or negative). The familiar phenomenon of a static 'shock' is caused by the neutralization of charge. Static electricity can reside in people, clothing or tools etc. The static electricity must be discharged to EARTH before handling any delicate electronic components or computer components. Use of Magnetic tools should be avoided at all times. PLEASE FOLLOW THE ENCLOSED INSTRUCTIONS VERY VERY CAREFULLY To view small print please increase your screen size to 200%
CM-TT302	Traintronics	302 DCC& DCC FITTED – BLOCK OCCUPANCY DETECTOR MODULE – THIS IS NOT A TOY To view small print please increase your screen size to 200% MORE DETAINS AVAILABLE >> www.cravenmodels.com/TRAINTRONICSOCCUPANCY.htm << CLICK

TRAINTRONICS SIGNALS – DCC COMPATIBLE

TRAINTRONICS COLOUR LIGHT SIGNALS

READY ASSEMBLED COLOUR LIGHT SIGNALS

EASY TO INSTALL – NO SOLDERING OF WIRES etc – 2 TERMINAL BLOCKS INCLUDED.

Can operate with DCC Accessory Decoder if required

Built-in Circuit Protection, Fading In-Fading Out adjustment,

Plug & Play Interface Circuit Board, LED’s for low power consumption.

TERMINAL BLOCKS INCLUDED - NO SOLDERING REQUIRED

Easy to install - Just follow enclosed instructions

DCC Compatible

Signal Identification Numbers/Lettering included

PART No	TRAINTRONICS SIGNALS	DESCRIPTION	GAUGE
CM-TT100	Traintronics	100 Single Aspect Yellow c/w Interface Board	OO
CM-TT101	Traintronics	101 Single Aspect Flashing White OO TBA	OO
CM-TT102	Traintronics	102 2-Aspect Red/Green c/w Fading Interface Board - Ground Mounted	OO
CM-TT102H	Traintronics	102 HEAD ONLY 2-Aspect Red/Green c/w Fading Interface Board
CM-TT103	Traintronics	103 2-Aspect Yellow/Green c/w Fading Interface Board - Ground Mounted	OO
CM-TT103H	Traintronics	103 HEAD ONLY 2-Aspect Yellow/Green c/w Fading Interface Board
CM-TT104	Traintronics	104 3-Aspect Red/Yellow/Green c/w Fading Interface Board - Ground Mounted	OO
CM-TT104H	Traintronics	104 HEAD ONLY 3-Aspect Red/Yellow/Green c/w Fading Interface Board
CM-TT105	Traintronics	105 3-Aspect Yellow/Green/Yellow c/w Fading Interface Board - Ground Mounted	OO
CM-TT105H	Traintronics	105 HEAD ONLY 3-Aspect Yellow/Green/Yellow c/w Fading Interface Board
CM-TT106	Traintronics	106 3-Aspect SPAD OO TBA	OO
CM-TT107	Traintronics	107 4-Aspect Red/Yellow/Green/Yellow c/w Fading Interface Board - Ground Mounted	OO
CM-TT110	Traintronics	110 2-Aspect Red/Green with feather left c/w Interface Board - Ground Mounted	OO
CM-TT111	Traintronics	111 2-Aspect Red/Green with feather right c/w Interface Board - Ground Mounted	OO
CM-TT112	Traintronics	112 3-Aspect Red/Yellow/Green with feather left c/w Interface Board - Ground Mounted	OO
CM-TT113	Traintronics	113 3-Aspect Red/Yellow/Green with feather right c/w Interface Board - Ground Mounted	OO
CM-TT114	Traintronics	114 4-Aspect with feather left c/w Interface Board - Ground Mounted	OO
CM-TT115	Traintronics	115 4-Aspect with feather right c/w Interface Board - Ground Mounted	OO

		TRAINTRONICS SIGNAL STRUCTURES
CM-TT180	Traintronics	Modern Style 4 track Gantry Kit (Signal heads not included) OO
		This kit is a Brass thin plate pressing and needs to be soldered together
CM-TT181	Traintronics	Steam Era 4 Track Gantry Kit (Signal heads not included) OO
		This kit is a Brass thin plate pressing and needs to be soldered together
CM-TT280	Traintronics	N GAUGE SIGNAL GANTRY
		TRAINTRONICS SIGNALS

	TRAINTRONICS SIGNALS			SRP	OUR PRICE
TT100	00 Gauge	Traintronics	100 Single Aspect Yellow c/w Interface Board	TBA	TBA
TT101	00 Gauge	Traintronics	101 Single Aspect Flashing White OO TBA	TBA	TBA
TT102	00 Gauge	Traintronics	102 2-Aspect Red/Green c/w Fading Interface Board - Ground Mounted	14.50	13.05
TT102 HEAD (150)	00 Gauge	Traintronics	102 HEAD 2-Aspect Red/Green c/w Fading Interface Board	12.99	11.69
TT103	00 Gauge	Traintronics	103 2-Aspect Yellow/Green c/w Fading Interface Board - Ground Mounted	14.50	13.05
TT103 HEAD (151)	00 Gauge	Traintronics	104 HEAD 3-Aspect Red/Yellow/Green c/w Fading Interface Board	14.99	13.49
TT104	00 Gauge	Traintronics	104 3-Aspect Red/Yellow/Green c/w Fading Interface Board - Ground Mounted	16.50	14.85
TT105	00 Gauge	Traintronics	105 3-Aspect Yellow/Green/Yellow c/w Fading Interface Board - Ground Mounted	16.50	14.85
TT106	00 Gauge	Traintronics	106 3-Aspect SPAD OO TBA	TBA	TBA
TT107	00 Gauge	Traintronics	107 4-Aspect Red/Yellow/Green/Yellow c/w Fading Interface Board - Ground Mounted	18.99	17.09
TT110	00 Gauge	Traintronics	110 2-Aspect Red/Green with feather left c/w Interface Board - Ground Mounted	24.99	22.49
TT111	00 Gauge	Traintronics	111 2-Aspect Red/Green with feather right c/w Interface Board - Ground Mounted	24.99	22.49
TT112	00 Gauge	Traintronics	112 3-Aspect Red/Yellow/Green with feather left c/w Interface Board - Ground Mounted	26.99	24.29
TT113	00 Gauge	Traintronics	113 3-Aspect Red/Yellow/Green with feather right c/w Interface Board - Ground Mounted	26.99	24.29
TT114	00 Gauge	Traintronics	114 4-Aspect with feather left c/w Interface Board - Ground Mounted	28.99	26.09
TT115	00 Gauge	Traintronics	115 4-Aspect with feather right c/w Interface Board - Ground Mounted	28.99	26.09
TT180	00 Gauge	Traintronics	180 MODERN ERA GANTRY 4 TRACK	32.50	29.25
TT181	00 Gauge	Traintronics	181 GANTRY STEAM ERA 4 TRACK WIDTH	20.00	18.00
TT300	00 Gauge	Traintronics	300 Slow motion motor driven DCC / Anol point motor	22.50	20.25
TT301	00 Gauge	Traintronics	301 Signal interface for DCC & Analogue operation	12.25	11.03
TT302	00 Gauge	Traintronics	302 Block detection unit DCC & Analogue operation	10.95	9.86
TT305	00 Gauge	Traintronics	305 Turntable motor	TBA	TBA
Traintronics Signal Heads for Gantry Mounting with long leads and interface board
TT150	00 Gauge	Traintronics	150 2 Aspect R/G long leads c/w interface board for gantry	12.99	11.69
TT151	00 Gauge	Traintronics	151 3 Aspect R/Y/G long leads c/w interface board for gantry	14.99	13.49
TT152	00 Gauge	Traintronics	152 4 Aspect R/Y/G/Y long leads c/w interface board for gantry	16.99	15.29
TT153	00 Gauge	Traintronics	153 2 Aspect R/G LH feather long leads c/w interface board for gantry	22.99	20.69
TT154	00 Gauge	Traintronics	154 2 Aspect R/G RH feather long leads c/w interface board for gantry	22.99	20.69
TT155	00 Gauge	Traintronics	155 3-Aspect R/Y/G LH feather c/w Interface Board	26.99	24.29
TT156	00 Gauge	Traintronics	156 3-Aspect R/Y/G RH feather c/w Interface Board	24.99	22.49
TT157	00 Gauge	Traintronics	157 4 Aspect R/Y/G/Y LH feather c/w Interface Board	26.99	24.29
TT158	00 Gauge	Traintronics	158 4 Aspect R/Y/G/Y LH feather c/w Interface Board	26.99	24.29
TT280	N Gauge	Traintronics	Modern Style Gantry	27.50	24.75

DAPOL PLASTIC KIT – Several can be joined together to cover many tracks

This plastic Gantry comes with three dummy non working colour light signals. Some modelers drill a small hole in the centre of each dummy aspect and fit small LED’s into the holes. Can be quite effective. Or use ECKON Wall Signal Kits. ENES10 or 11 or 12 , or Traintronics Heads – shown above.	Dapol CO 17 OO Scale Signal Gantry
www.cravenmodels.com/ECKON.htm << Click	SRP £4.30

WARNING DELICATE ELECTRICS / ELECTRONICS

Beware of STATIC ELECTRICITY on HANDS & TOOLS

DCC and ELECTRONIC COMPONENT HANDLING.

This Signal Kit contains delicate electrics / electronic components. Please read the installation instructions very carefully – Several times.

If in any doubt please contact your Local Electronics Expert. Ensure that you use the correct power supply.

Incorrect installation will cause instant failure and possible short circuiting.

STATIC ELECTRICITY

Static electricity refers to the build up of electric charge on the surface of objects. The static charges remain on an object until they either bleed off to ground or are quickly neutralized by a discharge.

Although charge exchange can happen whenever any two surfaces come into contact and separate, a static charge will only remain when at least one of the surfaces has a high resistance to electrical flow (an electrical insulator).

The effects of static electricity are familiar to most people because we can see, feel and even hear the spark as the excess charge is neutralized when brought close to a large electrical conductor (for example a path to ground),

or a region with an excess charge of the opposite polarity (positive or negative). The familiar phenomenon of a static 'shock' is caused by the neutralization of charge.

Static electricity can reside in people, clothing or tools etc.

The static electricity must be discharged to EARTH before handling any delicate electronic components or computer components.

Use of Magnetic tools should be avoided at all times.

Cravenmodels – Modeltrainsuk

Warranty and Returns www.cravenmodels.com/TERMS.htm

SIGNAL NUMBERS INCLUDED

NOTE - THE ENCLOSED DIAGRAMS ARE FOR GUIDANCE –

YOU MUST FOLLOW THE MANUFACTURERS INSTRUCTIONS.

N GAUGE RANGE OF SIGNALS COMING SOON – WATCH THIS SPACE

WARNING DELICATE ELECTRICS / ELECTRONICS

Beware of STATIC ELECTRICITY on HANDS & TOOLS

DCC and ELECTRONIC COMPONENT HANDLING.

This Signal Kit contains delicate electrics / electronic components. Please read the installation instructions very carefully – Several times.

If in any doubt please contact your Local Electronics Expert. Ensure that you use the correct power supply.

Incorrect installation will cause instant failure and possible short circuiting.

STATIC ELECTRICITY

Static electricity refers to the build up of electric charge on the surface of objects. The static charges remain on an object until they either bleed off to ground or are quickly neutralized by a discharge.

Although charge exchange can happen whenever any two surfaces come into contact and separate, a static charge will only remain when at least one of the surfaces has a high resistance to electrical flow (an electrical insulator).

The effects of static electricity are familiar to most people because we can see, feel and even hear the spark as the excess charge is neutralized when brought close to a large electrical conductor (for example a path to ground),

or a region with an excess charge of the opposite polarity (positive or negative). The familiar phenomenon of a static 'shock' is caused by the neutralization of charge.

Static electricity can reside in people, clothing or tools etc.

The static electricity must be discharged to EARTH before handling any delicate electronic components or computer components.

Use of Magnetic tools should be avoided at all times.

Cravenmodels – Modeltrainsuk

Warranty and Returns www.cravenmodels.com/TERMS.htm

www.cravenmodels.com/SIGNALSHELP.htm << Click

OTHER COMPLEMENTARY PRODUCTS - VIESSMANN

	Viessmann  -  VN4515 HO Scale Marker Signal Banner REPEATER height 55mm - movable banner arm and lit, compact, under baseboard drive unit
	£35.00 OUR PRICE £31.49
	Viessmann  -  VN4516 HO Scale Marker Signal Ground Banner - REPEATER height 15mm - movable banner arm and lit, compact, under baseboard drive unit
	£32.50 OUR PRICE £29.25
	Viessmann  -  VN4517 HO Scale Marker Signal Banner REPEATER - movable banner arm and lit, compact, under baseboard drive unit height 65mm
	Only £34.50 OUR PRICE £30.99

Viessmann  -  VN4617

HO Scale

Marker Signal Banner – REPEATER SIGNAL – Mount within Platform section or Lineside

- height 65mm - movable banner arm and lit, compact, above baseboard drive unit.

£35.50 Our Price £31.90

NOW BACK IN STOCK

ECKON BERKO SIGNAL SWITCHES – CLICK HERE

MODEL RAILWAY WIRE
	Gaugemaster Model Railway Wires All Scales Z to O 4 coils Wire each 7 x 0.2mm by approx 10 Metres long. You select your colours by email sales@cravenmodels.com SELECT FROM RED – WHITE – GREEN – GREY – BROWN – BLACK – BLUE – YELLOW – PINK - ORANGE
	SPR £7.00 Our Price £6.35
	Gaugemaster  Model Railway Wires All Scales Z to O 6 coils Wire each 7 x 0.2mm by approx 10 Metres long. You select your colours by email sales@cravenmodels.com SELECT FROM RED – WHITE – GREEN – GREY – BROWN – BLACK – BLUE – YELLOW – PINK - ORANGE
	SPR £10.50 Our Price £9.45
	Gaugemaster Model Railway Wires All Scales Z to O 8 coils Wire each 7 x 0.2mm by approx 10 Metres long. You select your colours by email sales@cravenmodels.com SELECT FROM RED – WHITE – GREEN – GREY – BROWN – BLACK – BLUE – YELLOW – PINK - ORANGE
	SPR £14.00 Our Price £12.60
	Gaugemaster Model Railway Wires All Scales Z to O 10 coils Wire each 7 x 0.2mm by approx 10 Metres long. COLOURS AS SHOWN Order by email sales@cravenmodels.com SELECT FROM RED – WHITE – GREEN – GREY – BROWN – BLACK – BLUE – YELLOW – PINK - ORANGE
	SPR £17.50 Our Price £15.75

SWITCHES

Gaugemaster Point Motor Switch GM510 A5H

All Scales

A5H Mini-Toggle for Point Motors

1 off GM510-1 SPR £2.15 Our Price £1.95

2 0ff GM510-2 SPR £4.30 Our Price £3.87

3 off GM510-3 SPR £6.45 Our Price £5.80

4 off GM510-4 SPR £8.60 Our Price £7.75

	Gaugemaster 2 Aspect SIGNAL SWITCH GM508 A5C All Scales A5C Mini-Toggle for “ Aspect Red/Green Signal On /On
	1 off GM508-1 SPR £1.90 Our Price £1.75 2 0ff GM508-2 SPR £4.30 Our Price £3.45 3 off GM508-3 SPR £6.45 Our Price £5.15 4 off GM508-4 SPR £8.60 Our Price £6.85

Gaugemaster Rotary Switch GM519

All Scales Z to O

A7 Rotary Switch 1 Pole 12 Way

SRP £2.75 Our Price £2.50

	Gaugemaster GM520 All Scales A8 Rotary Switch 2 Pole 6 Way
	SRP £2.75 Our Price £2.50
	Gaugemaster GM521 All Scales A9 Rotary Switch 3 Pole 4 Way
	SRP £2.75 Our Price £2.50
	Gaugemaster GM522 All Scales A10 Rotary Switch 4 Pole 3 Way
	SRP £2.75 Our Price £2.50

Rotary Switches, needless to say, have a rotary switching movement. They will be needed when the number of circuits that need to be changed

Simultaneously exceeds the capacity of a toggle or slide switch.

A7, A8, A9 & A10 ROTARY SWITCHES – Will cover multiple switching roles where more than two circuits need to be simultaneously switched - for example if three or four track controllers are being used for ‘cab control’.

This switch can be used to unlatch relays by momentarily interrupting the power supply

to the actuating coil.

£11.69

PCU-1 (Plus PCU 2) 2 ASPECT SIGNAL and PM-1 OR PM-4 POINT MOTOR SUGGESTED WIRING DIAGRAM

www.cravenmodels.com/SEEP.htm <<< Click for Point Motors and switching

www.cravenmodels.com/BERKO.htm <<< Click for Signals and wiring

Fixed Voltage Regulated Mains Adaptor

230v AC to 12V DC 400mA Supply

CM-MG81C

£12.99 plus P & P

Product Features
· Interchangeable output plugs
· Fixed output voltage 12v DC
· Robust black ABS housing
· Thermal fuse protection

Specifications:
Input voltage:	AC 230 V/50Hz
Output current:	12v DC, 400mA max.
Output plugs:	A choice of 6 connectors are provided with the unit: 2.1 x 5mm, 2.5 x 5.5mm, 1.35 x 3.5mm and 1.5 x 5.5mm hollow plugs and 2.5 and 3.5mm mono jacks
Dimensions:	92 x 56 x 76mm
Order	Input	Output	Output
Code:	power:	voltage:	power:
CMMG81C	13.6W	DC 12 V	4.8VA

Green, Yellow, Brown, Orange

Wire 7 x 0.2mm 10 Metres each

Blue, Red, White, Black

	£6.25 for 4 coils
Wire 7 x 0.2mm 10 Metres each

3 Thin wires

	Three coils £ 3.99
5m Super Thin Wire Black / Yellow / Brown 5m each

Switches

SEEP POINTMOTORS

Universal point motors to operate most makes of points

All are water resistant and require between 12 and 25 volts AC or DC at a maximum of 1.5amps to operate. Suggest the use of a CDU

Seep PM-1 Point motor with switch

Scale / Type:	O/ OO/ HO/ N Scales
Part Number:	PM-1
Description:	Seep Point Motors have the advantage of being the only point motors available with variable thrust. They also have the advantage of being easy to fix under the baseboard. requiring only a small slot to operate the point. The PM-1 is our best selling point motor and has a built in changeover switch to operate accessories or change frog polarity.

You need TWO SEPARATE POWER SUPPLIES

One for the POINT MOTOR between 12 and 25 volts AC or DC at a maximum of 1.5 amps to operate the Point Motor.

The Second for THE SIGNAL (ECKON / BERKO or TRAINTRONICS) of 12 DV to operate the Signal.

Seep PM-2 Point motor without switch

Scale / Type:	O/ OO/ HO/ N Scales
Part Number:	PM-2
Description:	Seep Point Motors have the advantage of being the only point motors available with variable thrust. They also have the advantage of being easy to fix under the baseboard. requiring only a small slot to operate the point. The PM-2 is our standard point motor with no changeover switch.

Point Motor shown upside down in packaging

Seep PM-4 Point motor latch (SPRING) & switch

Scale / Type:	O/ OO/ HO/ N Scales
Part Number:	PM-4
Description:	Seep Point Motors have the advantage of being the only point motors available with variable thrust. They also have the advantage of being easy to fix under the baseboard. requiring only a small slot to operate the point. The PM-4 is a self-latching point motor, ideal for use with hand-made points, and also includes a changeover switch for operating accessories or changing frog polarity.

Point Motor shown upside down in packaging

You need TWO SEPARATE POWER SUPPLIES

One for the POINT MOTOR between 12 and 25 volts AC or DC at a maximum of 1.5 amps to operate the Point Motor.

The Second for THE SIGNAL (ECKON / BERKO or TRAINTRONICS) of 12 DV to operate the Signal.

WARNING DELICATE ELECTRICS / ELECTRONICS

Beware of STATIC ELECTRICITY on HANDS & TOOLS

DCC and ELECTRONIC COMPONENT HANDLING.

This Signal Kit contains delicate electrics / electronic components. Please read the installation instructions very carefully – Several times.

If in any doubt please contact your Local Electronics Expert. Ensure that you use the correct power supply.

Incorrect installation will cause instant failure and possible short circuiting.

STATIC ELECTRICITY

Static electricity refers to the build up of electric charge on the surface of objects. The static charges remain on an object until they either bleed off to ground or are quickly neutralized by a discharge.

Although charge exchange can happen whenever any two surfaces come into contact and separate, a static charge will only remain when at least one of the surfaces has a high resistance to electrical flow (an electrical insulator).

The effects of static electricity are familiar to most people because we can see, feel and even hear the spark as the excess charge is neutralized when brought close to a large electrical conductor (for example a path to ground),

or a region with an excess charge of the opposite polarity (positive or negative). The familiar phenomenon of a static 'shock' is caused by the neutralization of charge.

Static electricity can reside in people, clothing or tools etc.

The static electricity must be discharged to EARTH before handling any delicate electronic components or computer components.

Use of Magnetic tools should be avoided at all times.

Cravenmodels – Modeltrainsuk

Warranty and Returns www.cravenmodels.com/TERMS.htm

CRAVENMODELS – MODELTRAINSUK