ELECTRONIC ACCESSORIES FOR THE MODEL RAILWAY ENTHUSIAST
DCC - POINT MOTORS - INTERFACE DECODERS - OCCUPANCY MODULES SIGNALS
DCC INSTRUCTION HANDBOOK
DISCOUNT PRICES AVAILABLE
Tel 01588 660 580
PLEASE READ THIS SECTION IMMEDIATELY BEFORE OPENING ANY COMPONENT PACKET
WARNING DELICATE ELECTRICS / ELECTRONICS
Beware of STATIC ELECTRICITY on HANDS & TOOLS
DCC and ELECTRONIC COMPONENT HANDLING.
This Signal Kit contains delicate electrics / electronic components. Please read the installation instructions very carefully Several times.
If in any doubt please contact your Local Electronics Expert. Ensure that you use the correct power supply.
Incorrect installation will cause instant failure and possible short circuiting.
Static electricity refers to the build up of electric charge on the surface of objects. The static charges remain on an object until they either bleed off to ground or are quickly neutralized by a discharge.
Although charge exchange can happen whenever any two surfaces come into contact and separate, a static charge will only remain when at least one of the surfaces has a high resistance to electrical flow (an electrical insulator).
The effects of static electricity are familiar to most people because we can see, feel and even hear the spark as the excess charge is neutralized when brought close to a large electrical conductor (for example a path to ground),
or a region with an excess charge of the opposite polarity (positive or negative). The familiar phenomenon of a static 'shock' is caused by the neutralization of charge.
Static electricity can reside in people, clothing or tools etc.
The static electricity must be discharged to EARTH before handling any delicate electronic components or computer components.
Use of Magnetic tools should be avoided at all times.
Warranty and Returns www.cravenmodels.com/TERMS.htm
HANDLING CIRCUIT BOARDS DO NOT TOUCH THE
HOLD BY THE OUTER EDGES AWAY FROM ANY ELECTRONIC COMPONENTS. A CLEAN ENVIRONMENT IS REQUIRED.
300 DCC& DCC FITTED SLOW
MOTION POINT MOTOR THIS IS NOT A
To view small print please increase your screen size to 200%
TT301 DIGITAL COLOUR LIGHT DECODER
DCC & DC BLOCK OCCUPANCY DETECTORS
DETECTION, AUTOMATIC CONTROL
TRAINTRONICS COLOUR LIGHT SIGNALS are designed to be run from 12v DC supply.
They can be controlled by our range of colour light switches or via a TRAINTRONICS DCC Decoder.
Fixed Voltage Regulated Mains Adaptor
230v AC to 12V DC 400mA Supply
£13.99 plus P & P
If you are operating a large number of TT300 Point motors we suggest the M1DC TRANSFORMER