The Hornby Select User Guide

The Hornby “Select” unit is an ideal way to enter the digital age of controlling a model railway.

Hornby Select Unit

The following are some of the many features and benefits that the Hornby Select digital Control has to offer:

select font and back

USER GUIDE Download

User Guide (1.5 MB)

LCD Display Guide

DCC LCD Guide

Controls up to 10 trains simultaneously, provided the necessary power is available.
The 1 amp power supply included allows for up to three locomotives (providing power is available) to be running at any one time.
Supports a maximum four amp power supply (3 amps to the track, 1amp to the accessory outlet) available separately.
Incorporates 128 speed steps for smooth control of locomotives.
Can programme locomotives with up to 99 levels of acceleration / deceleration.
The “Select” Unit supports up to nine functions per locomotive if required.
Able to programme up to 59* locomotives or other items containing a locomotive decoder and 40 points or other items that rely on a solenoid for operation. Eg. Electrically operated signals, electrically operated uncouplers and point motors.
It should be noted that items containing a locomotive decoder should always be programmed between† 1 - 59. This will ensure that the locomotive will function as expected. All items connected to Accessory Decoders should be programmed between 60 – 99.
The “Select” accommodates decoders that incorporate a functioning feed back system.
Supports XpressNet protocol.
Uncontrolled 15V DC analogue accessory outlet.
2 digit LCD display
External boosters can be supported through the XpressNet port. A standard RJ12 six-way cable can be used to connect the Select to a booster which has an RJ12 socket).
Up to 9 “Select” units can be connected together for individual control of 9 locomotives providing power is available.
The “Select” can be used as a Walkabout Unit when connected to the Hornby “Elite” Digital Unit.