POSTAGE & PACKAGING FOR GAUGEMASTER CONTROLLERS C/W TRANSFORMS & INDIVIDUAL TRANSFORMERS * £5.00

Cravenmodels

email sales@cravenmodels.com email questions@cravenmodels.com

ACCESSORIES	Retail (inc VAT)	Cravenmodels Price
CDU – Capacitor Discharge Unit for heavy duty Point motors, giving firm & positive action. Input 16 - 24vAC to a maximum of 1.25A Requires suitable power supply, Gaugemaster T3 or M3 recommended	10.95	10.40
GM140 Pair of LT OO Rollers	12.95	12.30
GM141 Pair of LT N rollers	12.95	12.30
HF-1 – Electronic automatic single output track cleaner.Input 16vAC to 1.25A maximum. Requires suitable power supply, Gaugemaster T1 or M1 recommended	24.95	23.70	May be used with most types of controllers
HF-2 – Electronic automatic twin output track cleaner.Input 16vAC to 1.25A maximum. Requires suitable power supply, Gaugemaster T1 or M1 recommended	36.95	35.10	May be used with most types of controllers
HF-3 – High frequency lighting generator.Input 16vAC to 1.25A maximum. Requires suitable power supply, Gaugemaster T1 or M1 recommended.	37.95	36.05	Not compatible with HF-1 & HF-2
LT N – Rolling road static loco tester and controller N gauge. Input 240vAC. Output 1 x 12vDC controlled, 1 x 16vAC uncontrolled for accessories.Total output 2A maximum	149.95	142.45	Use GM140 rollers x 8 pairs to convert to OO/HO gauge use
LT OO/HO – Rolling road static loco tester and controller OO/HO gauges. Input 240vAC. Output 1 x 12vDC controlled, 1 x 16vAC uncontrolled for accessories.Total output 2A maximum	149.95	142.45	Use GM141 rollers x 8 pairs to convert to N gauge use
PCU1 – Point control unit for use with most gauges and controlling up to 36 Points (18 singles). Input 240vAC, Outputs 7 x twin output to Point motors plus output for PCU-2.	82.95	78.80	May be expanded using PCU-2
PCU2 – Slave Point control unit fo use wiyh most gauges. Input from PCU-1 or CDU. Output 7 x twin output to Point motors plus output for further PCU-2.	36.95	35.10
SS-1 - Super Shuttle Unit. A time controlled unit which can be used with any controller to repeatedly change direction of travel. The duration of each sequence may be varied from approximately 20 - 70 seconds. Input 16vAC at a maximum of 1.25A. Requires s	24.95	23.70
SS-1/LGB – SHUTTLE FOR LGB	32.95	31.30
SS-2 - Station Stop Unit. Automatic stop and start control with realistic, adjustable, deceleration.Stop time adjustable from approximately 20 - 70 seconds (Factory set to 20 seconds). Input 16vAC to a maximum of 1.25A. Requires suitable power supply, Gau	29.95	28.45
SS-3 Automatic Train Control System allowing two trains to run on one circuit without colliding.Soft start & stop are incorporated in this unit. Input 16vAC at a maximum of 1.25A. Requires suitable power supply, Gaugemaster T1 or M1 recommended.	42.95	40.80

	DCC ELECTRICS

	DCC11 EXTENSION PLATE
	The Extension Plate allows Walkaround controllers to be plugged in at different locations around your layout, not restricting you to the sockets on the front of the Base Unit. This also allows the use of further Walkaround controllers on your layout and increases operational flexibility as well as making it much easier for more than one user to operate your layout. Every Extension Plate used enables a further 2 Walkarounds to be connected.

	DCC20 DECODER
	Key features of this standard Decoder include smooth operation, three speed step settings, plug and play, transponder id-equipped, all mode programming, decoder reset CV, motor isolation protection, advanced & universal consisting, 2 and 4 digit addressing, DCC compatible and NMRA compliant. This decoder is rated at 1.5 amp (2 amp peak) with 2 functions at 0.5 amps, and measures 16.76 x 30.4 x 6.35mm.

	DCC21 SMALL DECODER
	Key features of this small Decoder include smooth operation, three speed step settings, plug and play, transponder id-equipped, all mode programming, decoder reset CV, motor isolation protection, advanced & universal consisting, 2 and 4 digit addressing, DCC compatible and NMRA compliant. This decoder is rated at 1 amp (2 amp peak) with 2 functions at 0.5 amps, and measures 9.14 x 13.97 x 3.3mm.

	DCC30 ACCESSORY DECODER
	This 3 amp stationary decoder is NMRA compliant and has four outputs, best thought of as 4 decoders in 1, each with its own sub-address. This decoder is used for the operation of points and accessories with PRODIGY ADVANCE and can operate points individually or as part of a route-setting process. The Accessory Decoder measures 55 x 45 x 20mm.

	DCC40 AUTO REVERSE LOOP MODULE
	This useful module allows you to operate a reverse loop without needing to change the polarity of the track, a common situation that faces modellers with conventional analogue control model railways. Measures 45 x 25 x 25mm.

	DCC50 BOOSTER UNIT
	This useful module allows you to operate a reverse loop without needing to change the polarity of the track, a common situation that faces modellers with conventional analogue control model railways. Measures 45 x 25 x 25mm.